About Copper-Nickel Alloy Cu90/Ni10
Copper-Nickel Alloy 90/10 (Cu 90%, Ni 10%) is an economical alternative to Cu-Ni 70/30 alloy. It has additional composition of iron 1.4 % to provide increased resistance to general corrosion, erosion and impingement corrosion. It should not be used in chromic, hydrochloric and nitric acids and extensively polluted water with sewage and industrial garbage.
90/10 Cu Ni alloy can be formed by hot and cold processing techniques. Fine weldability. It can be used to prevent corrosion by turbulent and high velocity seawater. It has low temperature coefficient of electric resistance. Good ductility. Cu Ni alloy 90/10 doesn’t need surface protection therefore it assures additional security. It is an ideal metal for piping in the ship manufacturing industry as it has good resistance to stress corrosion cracking in ammonized marine water. Further it resists pitting & crevice corrosion.
Copper-Nickel Alloy 90/10 Industrial Nomenclatures: CN102, C70600, C70610, CW352H, DEF STAN 02-879, BS2870, BS2874, ASTM B151, EN 12163, 2.0872, NF A51-115, CuNi10Fe1Mn
ASME SB111, SB171, SB359, SB395, SB466, SB467, SB543, ASTM B111, B122, B151, B171, B359, B395, B432, B466, B467, B543, B608, DIN 2.0872, MIL C-15726, T-15005, T-16420, T-22214, SAE J461, J463
Seawater hardware, offshore site seawater pipes, propellers, boats, crankshafts, tidewater based power production units, desalination systems, oil refining and chemical processing, condenser tubes, plates, distiller tubes, condenser baffles, heat exchanger components, evaporators, saltwater pipes, water containers, brakes and hydraulic suspension equipments, automotive quenching systems, production of coins and medals
90- 10 Cu Ni Alloy heat processing
Generally the heat processing is only followed for soft annealing and stress relaxation in Copper-Nickel alloys. Recrystalizaiton annealing temperatures vary from 620oC to 900oC on the base of extent of cold processing, magnitude of nickel and other elements. Elevated temperatures are lined with small annealing periods and low temperatures with prolong annealing periods. The stress relaxation annealing is conducted from 280oC to 500oC. It is recommended to anneal alloy 90/10 in unaerated or in a nominal reducing condition.
|90- 10 Cu Ni Alloy Wire||90- 10 Cu Ni Alloy Wire Mesh|
|90- 10 Cu Ni Alloy Strip||90- 10 Cu Ni Alloy Sheet/Plate|
|90- 10 Cu Ni Alloy Rod/Bar||90- 10 Cu Ni Alloy Pipe|
|90- 10 Cu Ni Alloy Flanges||90-10 Cu-Ni Alloy Foil|
Heanjia Super Metals, America offers all above forms of 90- 10 Cu Ni Alloy in all standard as well as custom specifications.